Xemectrum

CAn someone please test to see if this works on msea?
Hello this is my guide to make a vac involving a fake foothold. This vac can vac ground monsters and flying monsters that spam on a foothold. This works and tested on :ems, on ems it gives you fake autoban after 5 min. on gms it just dcs you after 75 seconds or so (maybe you can vac on a spawn point and auto cs every 30 seconds) and brazil maplestory yuou get permant ban after 10 min or so
Now if you go into the map on ems do not cc or cs you will dc for gms the same, don't cc but I think you can cs use at your own risk and when you enter the map on gms or ems you will get this message (thanks isean for the image!):

On brazil maple you do't get any message
First you will need 2 things:
Hacreator 1.7 download:
http://www.mediafire.com/?nw1qhvqenez
HaRepacker 3.5 download:
http://www.mediafire.com/?lxzetz2zk2n

Step one:
First open hacreator choose the encription and maple folder then pick the map you want to vac:

Choose the map and press "load"


Step 2:
Now your in the map first what you want to press is foothold on the top:

Now press "add +" looks like this:

Step 3:
Now after you pressed add,find where you want to vac and press where you want the monsters to be vaced to:

Now make another foothold just like this (it does not matter if it's long or small):


Step 4:
Now press "connect" at the top it looks like this:

Now press one of the fake footholds and conect them like this:

Now after conecting those two footholds together go to tools>save and save as xml and with base 64 in the xml:



Step 4:
Open herepacker and load Map.wz and find the map id you edited and press "remove property":

Now go to xml>import and find the xml you dumped from hacreator and import it into the mapX (for this one I am puting it into map0)

Step 5:
Now double click your imported map id and to go fh mapper> rendermap and find the fake foothold you made and write down the nummber in this case it's 66:


Step 6:
Now click the map id and go to settings then check the "prev" and "next" boxes with the fake foothold in it so I will put 66 in each one:


Step 7:
Now go to render map and click a foothold that you will not walk on now click every foothold that has at least 1 monster spawn on it and press okay. A tip is to hold enter and press the footholds makes it go much faster.:

save map.wz and go into the game do whatever you want

Now here is the result of the vac:


Credits:
e for find and guide

iplaymaple4u wrote:CAn someone please test to see if this works on msea?
Hello this is my guide to make a vac involving a fake foothold. This vac can vac ground monsters and flying monsters that spam on a foothold. This works and tested on :ems, on ems it gives you fake autoban after 5 min. on gms it just dcs you after 75 seconds or so (maybe you can vac on a spawn point and auto cs every 30 seconds) and brazil maplestory yuou get permant ban after 10 min or so
Now if you go into the map on ems do not cc or cs you will dc for gms the same, don't cc but I think you can cs use at your own risk and when you enter the map on gms or ems you will get this message (thanks isean for the image!):

On brazil maple you do't get any message
First you will need 2 things:
Hacreator 1.7 download:
http://www.mediafire.com/?nw1qhvqenez
HaRepacker 3.5 download:
http://www.mediafire.com/?lxzetz2zk2n

Step one:
First open hacreator choose the encription and maple folder then pick the map you want to vac:

Choose the map and press "load"


Step 2:
Now your in the map first what you want to press is foothold on the top:

Now press "add +" looks like this:

Step 3:
Now after you pressed add,find where you want to vac and press where you want the monsters to be vaced to:

Now make another foothold just like this (it does not matter if it's long or small):


Step 4:
Now press "connect" at the top it looks like this:

Now press one of the fake footholds and conect them like this:

Now after conecting those two footholds together go to tools>save and save as xml and with base 64 in the xml:



Step 4:
Open herepacker and load Map.wz and find the map id you edited and press "remove property":

Now go to xml>import and find the xml you dumped from hacreator and import it into the mapX (for this one I am puting it into map0)

Step 5:
Now double click your imported map id and to go fh mapper> rendermap and find the fake foothold you made and write down the nummber in this case it's 66:


Step 6:
Now click the map id and go to settings then check the "prev" and "next" boxes with the fake foothold in it so I will put 66 in each one:


Step 7:
Now go to render map and click a foothold that you will not walk on now click every foothold that has at least 1 monster spawn on it and press okay. A tip is to hold enter and press the footholds makes it go much faster.:

save map.wz and go into the game do whatever you want

Now here is the result of the vac:


Credits:
e for find and guide

Since you already know the basics, we don't mind that you could try it out for us :X

Since you already know the basics, we don't mind that you could try it out for us :X

I need to download msea and since I only have 2 accounts made before ip block and I live in Canada, I can't make another account without using a proxy and I don't want to risk my accounts getting p/b

permant ban me after 5minutes or more

This Vac was edited by "Noob" of W8Baby.
Please but credits tq

Testing now ^.^ looks cool . Have to download direct x though

Prob give p/b when u logout.

Isn't this mapshifting? Of course it gives you a perma a/b.

All vacs involve prev/next changing except "0" (mapshifting) in MapleSEA except xChaoticx`s private vac will give the WORST result of all: PERMA-BANNED!!!!!!!!!

EMS: fake auto-ban meesage
GMS: d/cs after some time
MSEA: P/B-ed when re-login.

iSean wrote:This Vac was edited by "Noob" of W8Baby.
Please but credits tq

I am noob on w8baby.com.