Xemectrum

I'm going to show you how to make a teleporter in a map so you can get to places you can't get by jumping or to get to other places faster! (Good for Jumping Quest)
_________________________________________________________________________________
Requirements
1. Harepacker 3.2 (Can be downloaded below in the attachment)
2. Brain
3. Computer
3. .Net Framework 3.5 SP1
4. Map ID
_________________________________________________________________________________
Step 1: Open Harepacker 3.2


Step 2: Load Map.wz (Always remember to backup your wz files before starting)


Step 3: Double click the map you want to edit (Easier to search with Ctrl+F)


Step 4: Go to portal, and see what is the highest number of portal. In my case is 2. So select portal and press Ctrl+A and create two WzSubProperty and type a number higher than the highest portal number.


Step 5: Select the first sub and press Ctrl+A and do the following one by one as shown in the picture.
a)pn is the portal name, just put a name for the first portal, i put portal1


b)pt is the portal type which is always 1


c)tn is the name of the portal which you want to teleport to, for me is portal2


d)tm is the id of the map you are in, for me is 103000803


e)x is the location of the portal, put 0 first


f)y is the second number of the location of the portal, also put 0 too


Step 6: This step is almost the same as step 5, only this time the pn and tn is different.
a)This time the portal name of course must be different, just now i put my tn is portal2, so this pn must be portal2


b)I want the portal to go back to the first portal so i should put this portal1


Step 7: After you've done that, you need to find the location where you want to put your portal
a) Go to FH Mapping and select render map


b)As shown in this picture, you point at the place where you want to put your first portal, and look at the top left, remember the x and y numbers


c)Then you find the place where you want your second portal


Step 7: It's time to place your portal to where you want it
a)Go to the sub of your first portal and edit the x(Ctrl+M) and type in the number for x(includes -) you remember for your first portal


b)Go to the y of your first portal and put in the number for y


c) Do the same for the second portal

d)You made your own portal!! Just go to where you place your portal, and press up and you'll teleport to the other portal!


Step 8: Save it, go to File, Save and choose to save it in your maplestory folder as Map.wz, Press Yes, and press save again!

Step 9: Enjoy!!

lols nice guide with picture, i think the community would be happy of it

you can click on the portal u make in the Map Render to change it more easily, good job !

I was going to do that, but the x,y 0,0 is not visible at that map!

nice tut

ShiunYean wrote:I was going to do that, but the x,y 0,0 is not visible at that map!

lols icic ..

With this hack you can be the first at the top in kpq, Lpq, and etc!!

ShiunYean wrote:With this hack you can be the first at the top in kpq, Lpq, and etc!!

and ppl will report u lol

ShiunYean wrote:With this hack you can be the first at the top in kpq, Lpq, and etc!!

better not use it when other people dunno you are hacking . Use it on Jump Quest or Map Rusher .

Hmmmmm.....

I dont think so you can open and play MapleStory when you add something the Map.wz
You Got try??